Rated Power: 72W
Body Dimensions: 3529.2 × 25.2 cm
Telescopic Range: 30-70mm (adjustable)
Speed: 0-260 strokes per minute
Control Method: Remote control
Material: Stainless steel + silicone
Net Weight: 3.6kg
Power: 72W, Voltage: DC-24V/5A
Telescopic Speed: Intelligent frequency and speed switching
Operating Angle: Freely adjustable angle
Body Operating Noise: 50dB
Motor Thrust: 20N·cm
Accessories Included: 1 silicone dildo (size: 46 × 185mm), 1 remote control, 1 power adapter
1. Installing or Replacing the Dildo
a. You can use dildos of various sizes and materials.
b. To install a dildo, align the groove on the dildo with the protruding point on the machine, insert it, and tighten it by turning counterclockwise.
2. Using the S Key and M Key
a. S Key (Power/Standby): Press and hold the S key for more than 2 seconds to turn on the machine—the indicator light will illuminate, and the machine will enter standby mode. Press and hold the S key again for more than 2 seconds to turn off the machine. For quick operations, press the S key briefly to pause the machine, then press it again to resume operation.
b. M Key (Speed Control): Briefly press the M key to increase the speed through 9 levels (from 1st to 9th gear).
c. Stepless Speed Adjustment: Press and hold the M key for more than 2 seconds to activate infinite stepless speed control. The speed will gradually increase from 0 to maximum—release the button when you reach your desired speed.
d. Indicator Light Behavior: When the machine is in standby mode, the indicator light stays on continuously. When the speed reaches its maximum, the light flashes. When the machine is turned off, the indicator light turns off.
3. Installing the Telescopic Rod
a. Insert the telescopic rod into the hole at the base of the machine and turn it clockwise.
b. Secure it tightly with a wrench.
4. Adjusting the Telescopic Length
Use a wrench to loosen the screw by turning it counterclockwise, adjust the telescopic rod to your desired length (adjustable range: 3.0–7.5 cm), and then tighten the screw securely in the appropriate position.
5. Adjusting Height and Angle
Unplug the power, release the handle, and hold the main unit to adjust its position. The angle of the machine can be adjusted from -30° to +30°.
6. Power Outlet
Both the power adapter and power bank connect to this interface.
